Skip to main content

Vermona Modular qMI 2 – Quad MIDI Interface


Vermona´s second Eurorack module is a very flexible yet affordable MIDI/CV interface which can be up to four voice polyphonic. You can use it as four independent interfaces or in a mixed mode with simultaneous monophonic and polyphonic modes.

Each of the "output channels" has a CV output with 1V/octave, a gate output and two further control voltage outputs for MIDI controllers like modulation wheel and pitch bend wheel.

The output channels can be combined arbitrarily with each other or used totally independent with different MIDI channels. Combined output channels can be unisono, monophonic with rotating voice assignation or polyphonic.

There are three clock divider outputs that convert incoming MIDI clock signals as analog gate voltages.
A reset output allows e.g for keeping step sequencers (with an according reset input) by MIDI start/stop commands in sync.
With the Gate-input you can switch between the playmodes M1 and M2 with a gate-signal.

An important part of the concept is the simple use of all parameters without a display and complicated menu structures.

Features:

  • pitch-CV: 1V/octave
  • Gate voltages: 10V
  • CV1, CV2: 0-5V (or -2,5V..+2,5V with pitch bend)
  • legato function switchable per output channel
  • clock outputs (10V): 1/4, 1/8, 1/16 and 1/8T (can be doubled)
  • RESET output: 10V at MIDI STOP, 0V at MIDI START or CONTINUE

389€

Power consumption: 60mA at +12 V and 2mA at -12 V

Depth: 25mm


24 HP

Choose your Language


Alex4

Alex4 Distribution GmbH
Lessingstr. 98, 100 – Haus 11
13158 Berlin
Germany

This email address is being protected from spambots. You need JavaScript enabled to view it.
www.alex4.de

Tel +49(0)30 - 61 65 100 40
Fax +49(0)30 - 61 65 100 49


Cookie Consent

By continuing to browse or by clicking 'Accept', you agree to the storing of cookies on your device to enhance your site experience and for analytical purposes.