Skip to main content

Kenton LNDX MIDI Line Driver Pro


The LNDX MIDI Line Driver Pro extends MIDI beyond its 15 metre (50 feet) specification using CAT5 cable terminated with etherCON connectors.

LNDX comes as a main and secondary pair that allows MIDI to be sent accurately in both directions at the same time, across distances of over 500 metres (1640 feet) using a standard CAT5e cable terminated by Ethercon connectors.

This is over 33 times the distance achievable using standard MIDI cables.

The LNDX MIDI Line Driver Pro’s combination of balanced line drivers and twisted pair cable (CAT5e) gives a high degree of immunity to noise, which results in a very high degree of signal integrity – in plain language, a very reliable MIDI link over much greater distances than can be achieved with ordinary MIDI connections.

CAT5e cable is recommended: CAT5 cable will limit the transmission length to 100m.

The CAT5 cable from an LNDX main unit should only be connected to an LNDX secondary unit, not to another main unit, and NEVER to any other device, even if it has a similar connector. (e.g. Ethernet).

The main unit is mains powered using the included power supply, and the secondary unit is powered by the main unit over the Cat5e cable.

Choose your Language


Alex4

Alex4 Distribution GmbH
Lessingstr. 98, 100 – Haus 11
13158 Berlin
Germany

This email address is being protected from spambots. You need JavaScript enabled to view it.
www.alex4.de

Tel +49(0)30 - 61 65 100 40
Fax +49(0)30 - 61 65 100 49


Cookie Consent

By continuing to browse or by clicking 'Accept', you agree to the storing of cookies on your device to enhance your site experience and for analytical purposes.