Measures:
outside: approx. 550 (width) x 210 (height) x 420 (depth) mm
inside: 2 x 94 HP x 3 U (i.e. 10 HP more than the standard A-100 Base A-100PB)
usable depth for A-100 modules front row: approx. 70 mm
usable depth for A-100 modules rear row: approx. 90 mm

Quantity of bus boards: 2

Weight (without modules): about ? kg

Maximum Output Current: +12V/2000 mA, -12V/1200mA, +5V/4000mA

Important notes:

• In the area above the keyboard no modules with more than about 40 mm total height have to be mounted (e.g. no joystick modules) 
• Even the pre-patching of the modules has to be less than 40 mm (no "stackcables" !)
• Bevore the lid is mounted to the A-100PBK one has to check carefully if there is sufficient space for they keyboard across the full width. Otherwise the lid must not be mounted as the keyboard may be damaged.
• Damages of the keyboard because of unsufficient space (e.g. because of modules or patch cables with more than 40 mm total height) are not covered by warranty.
• The lid of the A-100PBK does not fit to the A-100PB, as the A-100PBK is about 50 mm longer because of the keyboard dimensions.