Skip to main content

Doepfer A-100LC3 - US 115V !!!


This frame is the small version of the low-cost cases A-100LC6/LC9, which is identical in construction to the A-100LC6, but has only one row with 84HP available for the installation of modules. It is equipped with a power supply (1200mA). For space reasons, the power supply of DIY-Kit #1 is used, as there is not enough space for the "normal" power supply A-100PSU3. Power is supplied by an external 230 volt AC power supply (transformer) as in DIY kit #1, with a hole on the left side of the case for plugging in the power supply (the external power supply is not shown in the photos above). The housing is made of raw wood and can be painted in any desired colour with the aid of a paint spray can, for example.

- Dimensions:

  • outside: approx. 445 (W) x 150 (H) x 160 (D)
  • inside: 1 x 84 HP x 3 U

- Usable depth for A-100 modules: approx.110 mm (calculated from the inside of the front panel)


- Weight (without modules):

  • approx. 2.5 kg without external transformer
  • approx. 3.5 kg with external transformer

- Number of bus boards: 1

- Maximum current output: 1200 mA

 

 

(The case is equipped with the new bus board V6 and not the old model as shown in the pictures) 

 

 

 


295€

28 connectors for modules




Choose your Language


Alex4

Alex4 Distribution GmbH
Lessingstr. 98, 100 – Haus 11
13158 Berlin
Germany

info@alex4.de
www.alex4.de

Tel +49(0)30 - 61 65 100 40
Fax +49(0)30 - 61 65 100 49


Cookie Consent

By continuing to browse or by clicking 'Accept', you agree to the storing of cookies on your device to enhance your site experience and for analytical purposes.